13″ Hot Surface Electronic Ignition System - 13SSEI-120VAC-NG

$1,924.30

Enhance your fire pit experience with our 13″ Hot Surface Electronic Ignition System.

Start Up: This is done by use of a wall switch or remote control. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame.
Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.
Shut Down: To turn OFF the fire pit simply use wall switch, remote control or whole house system.

Fully Assembled- ready to install. Control components are protected within valve box.
Start via wall switch, remote or whole house system; auto re-light if flame is lost.
Ignition is complete using a robust and reliable Hot Surface igniter.
On/Off models: Use with optional wall switch or Remote Control available.
High/Low Flame Control Models: Adjust high setting to low setting- ~45% turn down (Remote Control included).
120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.
24vac Option: Typically used pool side or with other lower voltage requirements.
Natural Gas or Liquid Propane: Factory built & tested for either fuel.
Internal temperature monitoring with overheat auto shutoff.
CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.
Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff.

13″ burner with hot surface electronic ignition for reliable, consistent flame start-up.
Durable, professional-grade construction for residential and commercial fire features.
Provides even flame distribution and efficient heat output.
Designed for safety, energy efficiency, and long-lasting outdoor performance.
Ideal for compact custom fire pit or fire table installations.

Q: What fuel does it use?
A: Natural gas (NG) connection required.
Q: Is it compatible with small fire pits?
A: Yes, engineered for 13″ burner setups; verify dimensions before installation.
Q: Is professional installation recommended?
A: Yes, for safe gas hookup and optimal ignition performance.